Thank you John, I will do that.... I think it was out of Datum GPS/LORAN primary reference.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Miles Sent: Sunday, August 07, 2011 7:40 PM To: 'Discussion of precise time and frequency measurement' Subject: Re: [time-nuts] Wenzel oscillator pin out? > Folks, > > I just found in my pile of stuff a Wenzel Associates Quartz oscillator. > Model # 500-03490D This is a 10 MHz ocxo that was in an old Central Office > clock module > I have spent the last hour or so searching with different search > engines but > no info can be located. > > The oscillator is 2" x 2" x 3.75" > With a 9 pin connector on the bottom > I don't know if there is a standard code The unit requires 14 volts to > operate as per the label. > > There are a red and black set of wire twisted, blue and white pair twisted > and a separate orange and green. > Sorry for the basic question but I don't want to pop something inside. > There is no SMA output > > Thank you It sounds like a Timekeeper-series part (http://www.wenzel.com/pdffiles1/Oscillators/TMK.pdf) but with 9 pins instead of 7. Drop a note to sales (at) wenzel.com -- if the customer that originally ordered the part is no longer in business, they will often be able to dig up the original data sheet for you. -- john, KE5FX _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
