Thanks to those that responded. I didn't get any negative responses, so I ordered one and will try it out.
Tnx es 73, Dick, W1KSZ -----Original Message----- >From: Bruce Griffiths <[email protected]> >Sent: Aug 13, 2011 12:31 PM >To: Discussion of precise time and frequency measurement <[email protected]> >Subject: Re: [time-nuts] Trimble T-Bolt Power Supply Question > >I have used one of the Cisco34-0874-01 supplies to run a Thunderbolt for >a couple of years. >It appears to work well. >However I haven't measured the resultant 10MHz output phase noise spectrum. >I am about to power another Thunderbolt with an open frame linear supply >(723 regulators with 2N3055 series pass transistors) so in principle >comparison of their output phase noise spectra should be feasible (when >I finish designing and building the required low noise post mixer preamps). > >Bruce > >paul swed wrote: >> Well I don't have a trimble. >> But my experience with cisco supplies is they come in a huge range of >> flavors. >> So I wouldn't be able to say one way or another. The larger ones require >> external connections and such. >> >> On Sat, Aug 13, 2011 at 9:38 AM, Richard W. >> Solomon<[email protected]>wrote: >> >> >>> I can assume from the underwhelming response that no one has tried to >>> use one of these ?? >>> >>> 73, Dick, W1KSZ >>> >>> >>> -----Original Message----- >>> >>>> From: "Richard W. Solomon"<[email protected]> >>>> Sent: Aug 11, 2011 12:26 PM >>>> To: [email protected] >>>> Subject: [time-nuts] Trimble T-Bolt Power Supply Question >>>> >>>> Has anyone used the Cisco Systems Power Supply (34-0874-01) to power >>>> the Trimble Thunderbolt ? I know there are other supplies out there, >>>> but I have one in the Junque Boxe and am curious if anyone has used >>>> one and how it performed. >>>> >>>> Thanks, Dick, W1KSZ >>>> >>>> _______________________________________________ >>>> time-nuts mailing list -- [email protected] >>>> To unsubscribe, go to >>>> >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> >>>> and follow the instructions there. >>>> >>> >>> _______________________________________________ >>> time-nuts mailing list -- [email protected] >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >>> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> > > >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
