On 21/08/2011 6:42 PM, Heinzmann, Stefan (ALC NetworX GmbH) wrote:
I obtained a 5370B with the "bad socket syndrome" and restored it to working
order.
I was wondering about the side panels, though. One of the side panels is
perforated for airflow, the other isn't. My version of common sense would
indicate that the perforated one would have to go on the left side, so that air
pushed in by the fan on the right would have to travel through the instrument
until it escapes on the left near the power transformer. On my box it was
mounted on the right, allowing the air to escape directly beside the fan.
Unfortunately, the manual was of no help with this, and despite thorough
discussions about 5370B cooling in this list, I couldn't find an answer here,
either. So what's the correct way of mounting the side panels?
Thanks for your help!
Cheers
Stefan
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
You are correct the perforations should be on the left side. There is
an article about the design of the flow around the OCXO and out past the
psu.
Tim
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
