Hello Ulrich,
There are 13 each, double pages of schematics for the FS700.
Most of my pages are marked up. When I got the manual, before I had the
hardware,
I read it thru and I highlighted each adjustment in the circuit to get a
better understanding.
Not much of a plot, but a pretty good story.
If you need a specific page, I can scan each 1/2 page and you can paste
together on receipt.
All I have is a simple A size Cannon scanner, but I can scan to high
resolution.
The other alternative is to get a new manual from Stanford Research
Systems for ~ 35$
Shipping may be a killer.....
Please advise.
Stan, W1LE Cape Cod FN41sr
On 8/31/2011 6:53 AM, Ulrich Bangert wrote:
Gentlemen,
I would like to thank you all for your help in this affair. In the meantime
we have both built the antenna according Stan's circuit and it seems to
perform well. It seems however that the antenna needs to be put a bit away
from the receiver itself because otherwise some kind of self-oscillation is
observed.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
