Hi The "new" name for the location that made them is:
Perkin Elmer Optoelectronics 35 Congress St #2921, Salem, MA 01970-7314 I've never seen a division or subsidiary name associated with the Rb's. The part of the company that makes them is part of the original core of the outfit. --------------------------- On the monitor outputs, fire the unit up and watch them with a voltmeter. They are likely either DC levels or 0-5V CMOS outputs. Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, September 07, 2011 2:40 PM To: [email protected]; Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Looking for information on EG&G TS-RFSRubidiumOscillator Usually something from EG&G will come from a division of the company. Princeton Applied Research for instance. If you could narrow it down to the actual device builder, you may get better searches. ------Original Message------ From: Skip Withrow Sender: [email protected] To: [email protected] ReplyTo: [email protected] ReplyTo: Discussion of precise time and frequency measurement Subject: [time-nuts] Looking for information on EG&G TS-RFS RubidiumOscillator Sent: Sep 7, 2011 11:27 AM I have just come across an EG&G TS-RFS Rubidium oscillator and have never seen any information on it. There is a 16-pin connector that is relatively well labeled, but some of the interface signals are still a mystery (like what is the range of the 'DC light', and what is the interface to the 'lock monitor' signal - also, what is 'REG MON'). Anyone with a manual for this one? Or any other knowledge. Google seems to be pretty devoid of information. Regards, Skip Withrow _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
