Hi Twisted pair is fine for the EFC. Shielded twisted pair (one end grounded on the shield) might be slightly better). A lot depends on how many yards long the EFC wire is :)....
Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Howard Sent: Wednesday, September 21, 2011 4:46 PM To: Discussion of precise time and frequency measurement Subject: [time-nuts] GPSDO - internal connections question I'm building a GPSDO using the VE2ZAZ board, an HP 10811 oscillator and a Trimble Resolution T GPS. My goal is a simple and cheap 10 Mhz standard for my little home electronics bench and ham shack. I have my power supply parts finally gathered up, now I have these boards that need interconnecting. I'm thinking I need to use coax cable for anything that has 10 Mhz on it. Do I need to shield the control voltage going to the oscillator _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
