In message <[email protected]>, Jim Lux writes:
>
>The standard currently defines a "time API" with some simple features to
>set and get time, nominally defined in terms of a transformation from
>some base clock (i.e. there's a default transformation of the form
>reported time = k1 * raw clock + k2). In the current standard, "time"
>is carried around as 32 bit seconds + 32 bit nanoseconds (which is, at
>least familiar to most people, being similar to POSIX seconds +
>microseconds from gettimeofday())
Take a look at FreeBSD's timecounters, what you are asking for
sounds pretty much like what I did 15 years:
http://phk.freebsd.dk/pubs/timecounter.pdf
I used a 32.64 internal format, to avoid rounding errors, particularly
in your "k1" term.
I'm headed for the US east-coast the next week, if we get anywhere
near each other, I'd be happy to talk, shoot me an email: [email protected]
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
[email protected] | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
