Thanks Robert. Another fellow also replied privately with the enclosure idea. That sounds like a good idea, but make sure you leave some way to punch the reset button on the bottom of the iPaq from outside the case. Before I got shutdown working, that was the only way to get the serial port back.
FWIW, my Thunderbolt is screwed to a wall mounted panel near floor level. I have the iPaq sitting in its cradle on top of my desk, thus using a minimal amount of space and only a single cable needs to go to the desk. That backlight really helps light up the room at night :-) Thanks, -Justin On Sat, Nov 26, 2011 at 8:02 AM, Robert Atkinson <[email protected]>wrote: > Hi Justin, > You are not the only one! I have a Thunderbolt and a couple of iPaqs. The > program looks great. I'm considering gutting a unit and building it into > the case with my T-Bolt. They are available used at minimal cost. > > Thank you for making this avialable. > Robert G8RPI. > > > > ________________________________ > From: Justin Pinnix <[email protected]> > To: Discussion of precise time and frequency measurement < > [email protected]> > Sent: Friday, 25 November 2011, 22:55 > Subject: [time-nuts] Thunderbolt Monitoring for Pocket PC > > Nuts, > > A while back, I scored an old Compaq iPaq Pocket PC for cheap at an > auction. Recently, I wrote a program for it that reads the time and health > information from a Thunderbolt and displays it in real-time. More info > available here: http://www.fuzzythinking.com/projects/thunderhead/ > > I may be the only guy in the world who owns both of those pieces of > hardware, but in case anyone else does, please enjoy this program. > > Thanks, > -Justin > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
