> I hooked up a 47k resistor from line to the 50 ohm input of my 5334B and it > "just worked."
That's something I wouldn't do. It's too easy to forget to push the 50 ohm button. I might do it if I had a handy 50 ohm terminator built into a BNC pass through. That would be easy to verify with a quick glance. > I am watching the 60 Hz drift all around as I type this (although not all > that far, seems to be holding within 0.01 Hz tonight). I'm surprised you are that close. How long have you been watching? I think 0.1 Hz (low) is where the US power companies have to file paperwork so they try (very) hard to avoid getting that low. Here is what I saw. Each data point is averaging over 10 seconds. http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-Jul11-12-freq.png -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
