In a message dated 15/12/2011 19:41:58 GMT Standard Time, [email protected] writes:
On Thu, Dec 15, 2011 at 11:05 AM, Chuck Forsberg WA7KGX N2469R <[email protected]> wrote: > 1. Will it work on 12 volts instead of 15? My bet is "no" as there is an internal regulator that likely needs headroom ----------------- I would assume no too, for the same reason, and don't forget that the version in question also needs 5 volts on pin 4. No reason why that shouldn't be provided from a regulator via the 15 volt line though ------------------ > 2. Is the serial i/o really RS-232 or something else There is a Max rs232 level converter inside so I assume "real rs232", not TTL levels > 3. Is there a command list? There is a book. Google "TECHNICAL MANUAL TM0110-2" ----------------- Real RS232, and a PC port will drive it. It just needs data in and out plus ground. Information in the manual that Chris highlights above, and plenty in the list archives, including a reasonably detailed "get you going" post from me recently. regards Nigel GM8PZR _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
