Chris Albertson wrote:
On Thu, Dec 15, 2011 at 11:05 AM, Chuck Forsberg WA7KGX N2469R <[email protected]> wrote:1. Will it work on 12 volts instead of 15?My bet is "no" as there is an internal regulator that likely needs headroom2. Is the serial i/o really RS-232 or something elseThere is a Max rs232 level converter inside so I assume "real rs232", not TTL levels3. Is there a command list?There is a book. Google "TECHNICAL MANUAL TM0110-2"
Correct in most ways, but as has been noted that manual states that the count used to offset the frequency (fine tune it) is:
7F FF FF FF = 2,147,483,647= +383 Hz 80 00 00 00 = -2,147,483,647= -383 Hzwhich would be 5.6e6 counts / Hz or about 1.8e-14 / count. The units reported on here give you about 7e-13 / count or about 142,000 counts / Hz. This is how my unit behaves.
Bob S.
<<attachment: smither.vcf>>
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
