Agreed, and, so much for using the reference output as a stable lab
reference.
On 12/23/2011 5:03 PM, jmfranke wrote:
A startup current of 0.95A at 5v implies a power of almost 5W and that
is way above the spec value <3.3W. That is another vote for the
oscillator being 3.3V.
John WA4WDL
--------------------------------------------------
From: "Dan Rae" <dan...@verizon.net>
Sent: Friday, December 23, 2011 10:27 AM
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Subject: Re: [time-nuts] eBay Giveaway Vectron OCXOs
Thanks for all the responses. A quick check before breakfast shows
that mine would seem to be for 5 Volts since the power consumption at
that input agrees with the data sheet referenced; the current peaks
at 0.95 A warming up and 0.13 A warm. Reference V out is 4.8 V.
Dan
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.