Don't need to stretch, use the two hardware interrupt pins... Don Chuck Forsberg WA7KGX N2469R > I was thinking ... starting with a 5680a and a GPS with > accurate 1pps but no 10 MHz ... > > Feed both 1pps signals to a 74ls123 to stretch the pulses to something > longer. > A 74ls74 is strobed by one of the one-shots, its D input being the other > one-shot. > > Connect both one-shots and the 74 to an Arduino's inputs. An Arduino > serial > output connects to the 5680a. > > The Arduino watches the one-shots to obtain rough lock, then pays > attention > to the 74 output for fine lock. Between the jitter on the 1pps and the > very long > time constant(s) used to control the 5680a it just might work. > > Attached: Phase plot of two Thunderbolts using same antenna but > different > GPSDO parameters. Plenty of jitter/noise/whatever. > > -- > Chuck Forsberg WA7KGX N2469R [email protected] www.omen.com > Developer of Industrial ZMODEM(Tm) for Embedded Applications > Omen Technology Inc "The High Reliability Software" > 10255 NW Old Cornelius Pass Portland OR 97231 503-614-0430 > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.
-- "Neither the voice of authority nor the weight of reason and argument are as significant as experiment, for thence comes quiet to the mind." R. Bacon "If you don't know what it is, don't poke it." Ghost in the Shell Dr. Don Latham AJ7LL Six Mile Systems LLP 17850 Six Mile Road POB 134 Huson, MT, 59846 VOX 406-626-4304 www.lightningforensics.com www.sixmilesystems.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
