Thank you though. Got it working fine thanks to all the answers and help! -Brian, WA1ZMS
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of gonzo . Sent: Wednesday, January 04, 2012 2:18 AM To: time-nuts Subject: Re: [time-nuts] FE-5680A dumb question... Hi Brian. Taking the list concensus and confirming it on my recently arrived '5680A, the pinout is as follows: 1. +15V (1500mA cold: 800mA hot) 2. Gnd 3. Rb Lock (lock = low) 4. +5V (~85mA) 5. Gnd 6. 1PPS (high until Rb Lock goes low) 7. 10Mhz 8. RS323-RX 9. RS232-TX These pinouts are not consistant across the FE-5680A range, but seems good for the 'current batch' of cheap units coming out of china. Cheers, ian > Date: Tue, 3 Jan 2012 20:58:10 -0500 > From: "Brian, WA1ZMS" <[email protected]> > To: "Time-Nuts" <[email protected]> > Subject: [time-nuts] FE-5680A dumb question... > Message-ID: <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > My E-bay FE-5680A finally arrived. (4weeks later) > > > > Of the pins on the DB-9 connector, which one is the RF output? > > The manual only talks about an SMA output. > > > > I know this has been talked about before, but I cannot find the thread. > > > > Thanks in advance & sorry for bandwidth, > > -Brian, WA1ZMS _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
