Step one...is the antenna in a location where it can see they sky? Sorry if it is a stupid question but you already said it was plugged in. :)
On Jan 6, 2012, at 19:24, "Don Lewis" <[email protected]> wrote: > Can someone please give me some pointers (my first time with a GPS module). > > > > A little hand-holding, pls. > > > > I bought three of these Rockwell D200 GPS receivers. (It's little GPS PWB > with an antenna connector and pins for connecting to the RS232- PC) > > > > All three 'appear' to work the same way (no apparent capture of satellites). > > > > Here's what I have: > > > > 1. VisualGPS installed and running. > 2. A small USB-RS232 card installed and appears to be operational. > 3. Small GPS active antenna plugged in. > 4. VisualGPS monitor just repeatedly displays: > $GPGGA,,,,,,0,00,,,,,,,*66 > 5. I think I understand this to be NMEA code to mean no satellites have > been acquired. > 6. The Rockwell D200 draws ~180ma (5V) with no antenna and ~190ma with > the small active antenna plugged in. > > > > What am I doing wrong? Other than maybe cheap china gps' and antenna??? > But it is what I could afford and thought it would be cheap to learn on. > > > > Thanks for your help. > > > > -Don > > > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
