On 1/16/12 6:58 PM, Magnus Danielson wrote:
On 01/17/2012 03:18 AM, [email protected] wrote:
I think the time jumps would be a problem for the GPS "customers".
Suppose I am computing speed by differential readings. The jump would
be an issue, especially if time went backwards.

File stamps. Stock timing. Similar problems.

If you do not desire jumps, do not use UTC time but GPS time out of the
receiver.

or TAI...



Jumping the internal time-scale would upset things, so a
none-jumping time-scale is used. If an application requires a
non-jumping time-scale, then use GPS time-scale for that application.


I just had an discussion last week with people who wrote a spec requiring GMT (copying an older spec that antedated UTC, I suspect). Subtle details of GMT vs UTC are lost on them. When the leap second notice came out I asked what they were going to do (since the logs need to be monotonic and continuous).


For now, they'll use the hack of shutting down before UTC midnight on 30 June and starting up later.

It turns out that most of the system actually uses TAI/GPS time and hence it isn't a problem, but it's technically non-compliant with the requirement for GMT. So they're stuck:

1) admit the system does not meet the requirement and seek a waiver of the requirement
2) Change the requirement

Both are painful.

Life would be easier if they just said.. use TAI time.

_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to