I think it depends on how long your willing to wait and a bit of luck. I took the risk and got two 5370B from and E seller. One as not working 'flashed numbers' when turned on for an offer of $175 and one that was dead for $100. I think shipping was around $30 each. At that price was willing to take the risk.I was lucky the dead one was set for 220V and the other worked after reseating the boards and removing the spider cocoons.
Before getting them I set an upper limit of $350 including shipping for a known good one. -pete On Tue, Jan 17, 2012 at 3:40 PM, Chris Albertson <[email protected]> wrote: > On Tue, Jan 17, 2012 at 3:23 PM, Don Lewis <[email protected]> wrote: >> Just curious, pls.... >> >> What would be a reasonable price to pay for one of these counters? > > It seems to depend hugely on the risk you are willing to take. This > most resent counter is listed as "not functioning as intended, returns > not accepted" but does show a mostly working display. It might be > just fine and work OK. > > Others are listed as being recently calibrated and come with 30 day warranty > > I think $250 to $500 for a "It may work, but no returns accepted" > counter and a lot more for one with a warranty. > > Other counters are cheaper. the HP5328 is very affordable ($50 if you > can wait for a deal) but of course is not nearly as nice of a machine. > > > Chris Albertson > Redondo Beach, California > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
