With the # of units in the hands of list members it makes sense to coordinate tests, characterizing the unit. The PICTIC is probably the only other device having that kind of penetration. Bert Kehren In a message dated 1/18/2012 8:17:29 P.M. Eastern Standard Time, li...@rtty.us writes:
Hi I think you would want something with better regulation to really get the Rb to perform well. Bob On Jan 18, 2012, at 6:05 PM, "Paul F. Sehorne" <p...@sehorne.org> wrote: > How important is the 15vdc at the initial startup 2amp, and then how important at the .7 amp settled rate? > > I just received two of these > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280439877318 > > Unloaded voltage is ~15.5vdc. At 700 ma voltage drops to 14.3 volts and with 2 amp load drops to 13.3 volts with a 2 amp load (and to 10 volts with a 5 amp load). Supposedly rated at 6 amps. I have only checked one, have not broken the packaging on the second one assuming its performance will be similar. > > Will this be a problem? > > Paul > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
