I've run my GPS antenna lead along with coax carrying 100 Watts on HF and 50 watts on VHF / UHF with no known issues.
I do have ferrite chokes on all my feed lines. I also use the Symmetrciom 53532 antenna. --- On Fri, 1/20/12, James Robbins <[email protected]> wrote: > From: James Robbins <[email protected]> > Subject: [time-nuts] T'bolt antenna lead-in running near HF RF transmitting > coax > To: [email protected] > Received: Friday, January 20, 2012, 1:41 PM > Can I run the coax feed-in from a > Symmetricom 58532A GPS antenna (feeding my T'Bolt) adjacent > to coax which is carrying HF RF of 500 watts? I have a > 1.5" hole through an outside wall in my house through > which my HF ham antenna coax passes (LMR400 coax). Can > I safely run the GPS antenna coax through the same hole > which would put the coax parallel with and touching the > other coax for about 8 inches. If not, how much > separation would be advisable? Many thanks. Jim > Robbins N1JR > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
