OK, so it is a common practice. On Mon, Jan 30, 2012 at 11:43 AM, <ewkeh...@aol.com> wrote:
> Where can you get a LEA-6T for $ 65? > Bert Kehren > > > In a message dated 1/30/2012 5:34:56 A.M. Eastern Standard Time, > bruce.griffi...@xtra.co.nz writes: > > The 100PPS output from Motorola receivers is phase jerked every second > in the same fashion. > > Bruce > > Azelio Boriani wrote: > > OK, now I know and wonder if other GPS receivers that have frequency > > outputs behave in this manner. For example the Motorola 100PPS output, > the > > uBlox 800Hz, the Navsync variable frequency output and so on. It is > > possible to compute solutions from GPS satellite at greater than 1 > second > > rate so the phase of these signals should be adjustable at a rate that > > could minimize the phase jump... this is only my opinion, not the real > > possibility. > > > > On Mon, Jan 30, 2012 at 11:15 AM, Bruce Griffiths< > > bruce.griffi...@xtra.co.nz> wrote: > > > > > >> The 10kHz is continuous but its phase jerked on the second. > >> The new phase is held until the next jerk. > >> > >> Bruce > >> > >> > >> Azelio Boriani wrote: > >> > >> > >>> Ah, is it a burst of 10KHz once a second? I don't have a Jupiter-T and > I'm > >>> a PPS-type discplining fan but I thought it was a continuous 10KHz. > >>> > >>> On Mon, Jan 30, 2012 at 10:33 AM, Attila Kinali<att...@kinali.ch> > wrote: > >>> > >>> > >>> > >>> > >>>> On Sun, 29 Jan 2012 00:50:35 -0600 > >>>> Ray Xu<rayxu...@gmail.com> wrote: > >>>> > >>>> > >>>> > >>>> > >>>>> For those who have experience using the Jupiter T GPS: > >>>>> I have bought this > >>>>> > >>>>> > >>>>> > >>>>> > >>>> http://www.ebay.com/itm/**Navman-jupiter-T-Tu60-GPS-Kit-** > >>>> > 1pps-10khz-GPS-Module-/**260790984470< > http://www.ebay.com/itm/Navman-jupiter-T-Tu60-GPS-Kit-1pps-10khz-GPS-Module-/260790984470 > > > >>>> > >>>> Ouch... For that price you get already a new LEA-6T, which is a state > of > >>>> the art timing GPS receiver. Beside having the better sensitivity > >>>> (more satelites in difficult conditions) it features also an > frequency > >>>> output that can go up to 10MHz (or 8MHz if you want low jitter). > >>>> > >>>> > >>>> Attila Kinali > >>>> -- > >>>> The trouble with you, Shev, is you don't say anything until you've > saved > >>>> up a whole truckload of damned heavy brick arguments and then you > dump > >>>> them all out and never look at the bleeding body mangled beneath the > heap > >>>> -- Tirin, The Dispossessed, U. Le Guin > >>>> > >>>> ______________________________**_________________ > >>>> time-nuts mailing list -- time-nuts@febo.com > >>>> To unsubscribe, go to > >>>> > https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts< > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > >>>> and follow the instructions there. > >>>> > >>>> > >>>> > >>>> > >>> ______________________________**_________________ > >>> time-nuts mailing list -- time-nuts@febo.com > >>> To unsubscribe, go to https://www.febo.com/cgi-bin/** > >>> > mailman/listinfo/time-nuts< > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > >>> and follow the instructions there. > >>> > >>> > >>> > >>> > >> > >> ______________________________**_________________ > >> time-nuts mailing list -- time-nuts@febo.com > >> To unsubscribe, go to https://www.febo.com/cgi-bin/** > >> > mailman/listinfo/time-nuts< > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > >> and follow the instructions there. > >> > >> > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.