Paul, I am looking at the data from the satellites and it shows dtls=16, WNt=139, WNlsf=158, DN=7.

Connected by DROID on Verizon Wireless

-----Original message-----
From: Poul-Henning Kamp <[email protected]>
To: Discussion of precise time and frequency measurement <[email protected]>
Sent: Fri, Feb 10, 2012 20:33:56 GMT+00:00
Subject: Re: [time-nuts] Leap seconds now showing on GPS satellites

In message <e809eaf9-1182-43fc-82ab-6415c5f83d68@blur>, "[email protected]" writes:
I see page 18 subframe 4 is now broadcasting a pending leap second being transmitted by the GPS sats. I had checked it earlier this week and they were still transmitting the old data. But sometime between Monday and
today
they changed it. For those with receivers or software programs monitoring

such, it should now show a pending leap second!

It does:

NTPns > show oncore 0
serial port = /dev/cuad5
state = 12      visible/track/lock = 10/8/0     dop = 0.0 [m]
2012-02-10 20:32:58.000836713
Leap second info: 2012-07-01 00:00:00 INSERT
           12194822 seconds (141 days) from now
lat = 199461973 (55.406104), lon = 40823017 (11.339727), ht 9071 (90.71)
http://maps.google.com/maps?ll=55.406104,11.339727&spn=0.03,0.08&t=k
rcv_status = 0x8 = AcqSat/PosHold
       utc_offset = 15
site_survey = 2 (~0 sec left)
Sat Dopler Elev Azi Health Mode SigStr IODE Status Offset
 9   2117   57 280   00     8    50      0    a2  0.150998000
12   3630   19 223   00     8    46      0    a2  0.201329648
15  -1549   59 203   00     8    53      0    a2  0.251661296
17   1039   39  95   00     8    51      0    a2  0.285215728
18  -1198   25 274   00     8    50      0    a2  0.301992944
22   1007   17 317   00     8    50      0    a2  0.369101808
27    182   83 285   00     8    50      0    a2  0.452987888
28  -2682   33  58   00     8    49      0    a2  0.469765104


--
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
[email protected]         | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence.

_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to