I've also used KiCAD. The inability to do 100x160mm Eurocards on the free version of Eagle was the killer for me. I also have a british program called EasyPC. Robert G8RPI.
________________________________ From: beale <[email protected]> To: Discussion of precise time and frequency measurement <[email protected]> Sent: Friday, 24 February 2012, 6:16 Subject: Re: [time-nuts] Schematic capture: KiCad? In case you haven't already had enough suggestions: KiCad is an open-source option. It is much less popular/well known than Eagle, but it is free, has no* limitations on layers, parts, or board size. Runs on Linux and Windows. All design files are in plain text format, hence easy to parse by eye or other tools as desired. There is some learning curve, as with all CAD tools. I laid out this simple decade divider PCB using KiCad: http://bealecorner.com/pcb/dd1/ and it wasn't too bad. It has an active user's group list. http://tech.groups.yahoo.com/group/kicad-users/ <- user's group mailing list http://kicad.sourceforge.net/wiki/Main_Page <- main project page http://teholabs.com/knowledge/kicad.html <- tutorial http://www.youtube.com/watch?v=rkQ0nVX1q1k <- video tutorial *actually, a maximum of 16 layers, and 44 x 44 inches in size. *Usually* that is not a limitation :-) Like others here, I recommend against "free" single-vendor lock-in tools that won't give you Gerber output and easy design portability. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
