On Mon, Feb 27, 2012 at 8:38 PM, Sam <[email protected]> wrote: > "Netduino is the Arduino with an Ethernet interface on it." > > Not quite, The Netduino is an open-source platform using the .NET Micro > Framework.
Looks like you a right. To many things with name almost the same. There are Arduinos with built-in Ethernet shields. That is what I meant. My plan is to "borrow" some code from the NTP Palisades driver and first build a Thuderbolt library for Arduino I'd be concerned that anything related to ".net" would forever tie you to Microsoft. But in both cases the big things are that you don't need to build a PCB or distribute programmed chips and using Ethernet means you can see it from a web browser using a computer or phone Is the development system for netduino cross platform? > ----- Original Message ----- > From: Chris Albertson > [mailto:[email protected]] > To: Discussion of precise time and > frequency measurement [mailto:[email protected]] > Sent: Tue, 28 Feb 2012 > 15:22:49 +1100 > Subject: Re: [time-nuts] VK4GHZ Thunderbolt Monitor and > Commander > > >> On Mon, Feb 27, 2012 at 8:04 PM, Sam <[email protected]> wrote: >> > I have known about this project for a while, I was excited at first but >> was put off by the price tag, >> > the fact that it is closed source and that it's not available as a kit. >> > >> > There is another project on the horizon by James M1DST that is based on >> the Netduino platform which will be open source. >> >> >> Why does everyone think alike? This describes what I want to do also. >> Netduino is the Arduino with an Ethernet interface on it. It makes >> a good platform for this because there is no need to make a PCB or >> distribute a "kit". The Arduino already has all the required >> connectors. >> >> >> Chris Albertson >> Redondo Beach, California >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
