If it's a 44pin plcc I can burn it. Dale Robertson NV8U
-----Original Message----- From: "Joseph Gray" <[email protected]> Sent: Sunday, March 18, 2012 3:18am To: "Discussion of precise time and frequency measurement" <[email protected]> Subject: [time-nuts] IOTECH 488 EPROM The text file accompanying the EPROM file on KO4BB's site mentions using this EPROM image with a NI controller. I have a NI GPIB-232CV-A. Can I use the image with this controller? If so, I assume that I then have the equivalent of an IOTECH controller? I partially disassembled my GPIB-232CV-A and from peering between the boards, it looks like the EPROM is a PLCC. I can't burn one of those. If I can use this image with my controller, can someone burn a chip for me? I'll pay for the chip and shipping, of course. Joe Gray W5JG _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
