Hello, I seem to have been steadily collecting time related equipment and doing very little with it, finally decided I should do something with this, and I'd like to start out simple.
So, I have a Motorola M12+ GPS receiver in a Synergy Systems adapter board, and one of those little Symtrik MSF receiver boards. I'd like to try and get both working under Linux with ntpd (not at the same time!), and was hoping that someone might be able to provide some pointers. Namely: - Pinout for the P1 adapter on the Synergy Systems board. From the NTP Oncore driver documentation it looks as though this should be well supported. - Advice on how to hook up the Symtrik board and to get that working with NTP As to the host, I'm looking to use a Raspberry Pi board running Linux: http://elinux.org/RaspberryPiBoard This does have a UART, but I think I'll only have TXD and RXD with the USB<->3.3v serial adapter that I'm using. Though the board does also have GPIO pins, which I'm hoping I could somehow use for the PPS with GPS, or with the Symtrik. Regards, Andrew -- Andrew Back http://carrierdetect.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
