Very nice, just what I would have hoped to achieve if I still had the switch caps:-) Regards Nigel GM8PZR In a message dated 22/04/2012 12:45:40 GMT Daylight Time, [email protected] writes:
Hello, this is my first message on this list, I've read the recent thread about racal dana's switches, this is the way i've done it: http://imageshack.us/photo/my-images/194/pulsantenuovo1r.jpg/ in this thread more details: http://www.eevblog.com/forum/product-reviews-photos-and-discussion/racal-dan a-1992-teardown/msg90950/#msg90950 A little crude but in a pair of hours i swapped all the switches. To obtain the proper tip shape to fit the original caps, i cutted a cross in a 2mm thick little brass plate and fixed it to a soldering iron, found the correct flow temperature of the plastic and the work was simple. The switches are normal 6x6mm tactile, only they tend to bounce sometime. Fabio. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
