Hi Attila, But.. is the CSAC not on the ITAR list? I would expect it to be, as even some precision OCXO and a lot of MCXO are.
This is the beauty, they are not ITAR or HAZMAT restricted! They received approvals. We just published an article about the CSAC GPSDO products we offer in the Microwave Journal, April issue, and this is listed there as one of the key advantages of CSAC's. Oh.. the CSAC is that low power? I thought they are in the 1W region. Good to know... Yes, CSAC itself rated at 115mW typical. They have a power down mode with auto-correct of the TCXO that gets to less than 30mW on average. CSAC's are game changers, and no one has anything even remotely comparable. I'm not quite sure about this. It would work if we had only to deal with one or two of devices, but with the numbers we need now, the work would probably cost more than a reel (i actually don't know what a reel costs, u-blox has not replied to my request for quotation i placed 3 weeks ago). A reel will cost some real $$$ if you can get it, more than removing the shields from the units, even if you are doing say 100 units.. With a proper heat gun, it takes only about 20 seconds to get the shield off, without any damage to the unit itself. The real question is, would a perfect 26MHz reference give you any GPS position performance improvement or not, that is what would be interesting to test.. bye, Said _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
