If it's of any use to you, here is a link to the layout and parts placement for a board I designed when I was playing with the oncore for APRS some years ago. The board is designed so the motorola oncore plugs in to the top of my board and is secured by 10mm high stand-offs. My board supplies a regulated 5 volts to the oncore, and has a max-232 for level translation to the db-9 on the end of the board. It can also be fitted with a rt angle connector for the 1pps from the oncore. The .pdf files are at the bottom of this page-
http://www.vk7krj.com/ham_stuff.htm -- Ken. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
