Hi Merv,
I found the Navman Jupiter designers guide which has the message
formats. What you need is message 1331.
Tac32 supports this receiver, so there should be a possibility at
setup to specify NMEA protocol. Else stuff it a 1331 .
The guide is at
<http://gpsd.berlios.de/vendor-docs/jupiter/MN002000A_JupiterReceiver_DesignerGuide_print.pdf>
It tells you how messages are constructed. You should be able to work
out the @@ format. Good hunting.
Mike
Le 11/05/2012 16:13, Merv Thomas a écrit :
Hi,
I am new to timenuts.
Is anyone able to give me the binary command sentence/code to send to
my Jupiter TU-60 to change it's output from Binary to NMEA please?
I assume it has to be a binary command starting with @@ but I am
unable to find a suitable command using Tac32 control software.
Merv VK6BMT
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
