My solution is 100% compatible with the OS. That is, no special drivers. I have had issues with some programs using "virtual" ports.
Magma boxes were common in digital audio recording prior to really "wide" (multichannel) sound cards. I've run 5 soundcards at a time under linux with the Magma box. Any kernel 2.6 or higher can use the Magma scheme. It also runs on win2k and win7. Mac too in theory, but I don't use Apple hardware so I can't verify this. -----Original Message----- From: Azelio Boriani <[email protected]> Sender: [email protected] Date: Tue, 22 May 2012 14:19:38 To: Discussion of precise time and frequency measurement<[email protected]> Reply-To: Discussion of precise time and frequency measurement <[email protected]> Subject: Re: [time-nuts] Serial port server .. any interest in a write up onusing ? There are Lantronix CoBox, XPort too and the TIBBO. Something like ebay 370532038785, 290714846432 for those of you in the States or 270711839584 for the Europe. They are one_serial_port-to-ethernet adapter based on the telnet protocol but Lantronix has a virtual COM port driver to translate the ethernet attached serial port into a normal COM port on your PC. On Tue, May 22, 2012 at 2:14 PM, <[email protected]> wrote: > For the maximum software compatibility, I'd go for the multiple port > serial card. Next step up would be a PCI expansion chasis like a Magma > using multiple serial cards. I got one on ebay and PCI slots work like the > real thing under both linux and windows. I use it for multiple soundcards, > but it works for any PCI card. > The only trick is to power the PCI expansion chassis before booting. > > -----Original Message----- > From: "J. L. Trantham" <[email protected]> > Sender: [email protected] > Date: Tue, 22 May 2012 06:54:02 > To: 'Discussion of precise time and frequency measurement'< > [email protected]> > Reply-To: Discussion of precise time and frequency measurement > <[email protected]> > Subject: Re: [time-nuts] Serial port server .. any interest in a write up > onusing ? > > Pete, > > I would like to hear more about this. Consider me an infant in 'network' > and use really simple terms. > > I have an old Dell computer that runs Win2KPro with two serial ports built > in that was discarded by my office. I use it to communicate with a TBolt > and a Z3816A. The ability to communicate with several other serial ports > would be beneficial but the thought of getting several PCI/Serial cards for > the computer seemed like the only option. I would love to hear of other > options, particularly for 'pennies'. > > Joe > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Pete Lancashire > Sent: Monday, May 21, 2012 9:55 PM > To: Discussion of precise time and frequency measurement > Subject: [time-nuts] Serial port server .. any interest in a write up > onusing ? > > > Like many time-nuts I have quite a few devices that communicate to the > outside world with a serial port. And like many I have more then one. In a > past life I use to have to connect to sometimes a 100 RS232 in one > location. > A popular device is called a terminal server or concentrator. They would > take from 1 to 48 RS232 ports on one side and let you talk to them via an > Ethernet interface. I so far have twelve RS232 ports in use. > > Now that the need for such devices has diminished, these terminal servers > are showing up, sometimes for pennies. > > One brand and model Digi's TS family of models I and have verified they > work > with Lady Heather and Trimble Studio on a Windows XP PC. > > Digi offers for free a program that makes each RS232 Port look like a COM > port, and after configuring the terminal server, and this driver, you just > just fire up Lady Heather pointing to the correct "COM Port". > > Other RS232 ports on the terminal server can either be COM ports, or one > can > be connected to via Telnet of for security SSH. For example I have an > Odetics on one port and I just enter telnet ts4a (the DNS name I gave one > of > the terminal > servers) 2003 (the IP port associated with the third RS232 port). > > So if this is of interest to anyone I'll go into more detail, models, setup > etc. > > -pete > > -pete > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
