Check for a software update. Try to send the $PRTHS,RSET,ALL command (the internal CW25 GPS should be an NMEA version).
On Thu, Jun 28, 2012 at 4:44 PM, ExpertEngineer <[email protected]>wrote: > Hello, > > Has anyone had a play with the FTS125 GPS reference from Connor Winfield. > > I have one question on it. > > I notice if the unit is locked to GPS and the antenna is removed, the unit > goes to holdover which is correct. > > If the antenna is replaced quickly (within minutes) then the module > changes back from holdover to GPS lock, which is what I would expect. > > However, if the antenna is left out for hours, then re-connected, the unit > never goes back to GPS locked and remains in holdover, this despite 8 or > more satellites being received. > > I have tested multiple boards and they all do this. This is on the CTV > TXCO version. I haven't tested the COO version yet. > > Anyone else seen this. Any fax? > > Best Regards > > Martyn > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
