-------- Original Message --------
Subject: Re: [time-nuts] Lucent GPS and RB pair
Date: Mon, 20 Aug 2012 10:00:29 -0700
From: Randy D. Hunt <[email protected]>
To: Discussion of precise time and frequency measurement
<[email protected]>
On 8/20/2012 9:09 AM, paul swed wrote:
Asking the wrong guy.
No clue
Regards
Paul
On Sun, Aug 19, 2012 at 11:09 PM, Tom Knox <[email protected]> wrote:
Hi Paul;
Has anyone played with these Lucent units much to see if LH could be
tweaked to work?
Thanks;
Thomas Knox
Date: Sun, 19 Aug 2012 22:44:38 -0400
From: [email protected]
To: [email protected]
Subject: Re: [time-nuts] Lucent GPS and RB pair
Boy do I agree with Bobs comment.
But I have several of the lucent RBs and at least most of mine are quite
old. Hey $20 you can't really argue. Or as they say you get what you pay
for.
So reasonable is a curious question. Or a caution.
By the way I am not at all complaining actually.
Regards
Paul.
WB8TSL
On Sun, Aug 19, 2012 at 9:13 PM, Bob Camp <[email protected]> wrote:
Hi
Compared to the other two, there is a lot less support for the RFTG
parts.
Lady Heather is a *very* good reason to use a TBolt.
Bob
On Aug 19, 2012, at 9:06 PM, Jerry <[email protected]> wrote:
Hi,
I am looking for opinions on the RFT Gm II- XO and RFT Gm II- RB
combination
compared to TBolt or HP 3815A. I can get the Lucent pair at a very
reasonable price. Are manuals easily obtained for them?
Thanks
Jerry
K1JOS
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
list:
I don't know about LH. But the Lucent software is out there. It just
takes some searching to find it. I have it around here somewhere. I
moved in Feb and still have not got the bench set up. There is some
documentation out there too. Just takes some hunting to find it. Check
to archives of this list for a lot of it. I have a pair that that had
been running 24x7 for about 9 months. no problems. Hope this helps.
Randy, KI6WAS
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
