From: Chris Wilson <[email protected]>
21/08/2012 11:40
Can anyone please link specifically to a suitable distribution amp for
my TB please, either here if it's allowed, or by e-mail to me at
[email protected] ? Cost is a factor, and I am in the UK. An Ebay
purchase would be painless. I feel it would be really easy for someone
as daft as me to buy something totally unsuitable. I want to run David
Partridge's divider board and have enough 10MHz signalleft to run
other stuff as well, David recommended I run the amp between the TB
and his divider. Cheers.
Chris,
I've been using an Extron ADA 3-80 RGB video DA for distributing standard
frequencies to other instruments. It has worked very well for me. They are
frequently available on Ebay quite cheaply.
.There's a good discussion on using the Extron DA for 10MHz frequency
distribution at http://www.ko4bb.com/ham_radio/Extron_3_80/. There's a
couple on Ebay right now (Item 160867891412 and Item 370641502891 {different
model}). They're in the USA, so shipping to the UK might be a bit painful
unless you can get someone to act as a shipping agent.
Other Extron models will probably do as well... chech out the Extron
literature for details. I like the ADA 3-80 because of the number of inputs
and outputs it offers. Bandwidth is great and noise is low. If you need
really low noise distribution, you will have to determine suitability for
your needs.
Cheers,
Dave M
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
