Hi Lots of choices:
1)do you need 1 pps distributed? 2)do you need 100 KHz, 1MHz, 5MHz (or really odd frequencies) for anything? 3)how many 10 MHz gizmos do you have? 4)Do you need / want to receive 10 MHz radio signals while distributing 10 MHz? (same question for other frequencies if you use therm). 5)What are you running the signals to? / how clean does the phase noise need to be? 6)What are you running the signals to? / how good does the short term stability need to be? 7)(same)/ how good does the isolation need to be? 8)(same)/ do you need redundancy or anything else unusual? For simple "need to run a frequency counter" needs, video amps are often the easy choice. For more demanding gear, you can have very complex distribution systems. Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rui Martins Sent: Tuesday, September 04, 2012 9:23 AM To: [email protected] Subject: [time-nuts] REF osc distribution. Hi, At the moment my GPSTM have 1.30000e-012 in alan deviation and it's time to connect to the equipements. Which is the best way to do it? CT1EBHT Rui Jorge Martins 73! _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
