And this is the key: finding out what types of measurements can be done is part of the path to be taken being a time-nut. It is better to use what already may be available in the home lab (usually every experimenter has a 'scope) and delay the purchase of the test gear.
On Sat, Sep 8, 2012 at 12:51 AM, Mark Spencer <[email protected]>wrote: > Robert, you have gotten some good advice already. > > With regards to rubidium standards I've bought several of the cheaper > rubidium units and with the benefit of hindsight I would have put the money > towards a higher quality item such as a PRS 10. There are some good write > ups on line that summarize the performance of the more commonly avaliable > rubidium standards. If you haven't already done so you might want to start > considering what type of measurement gear you are going to use for your > experiments. Before purchasing a time interval counter I was able to do > quite a bit of experimenting using a dual trace oscilloscope to compare two > signals. > > Regards > Mark Spencer > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
