Hi Doug I have seen comments that the later 8 channel Oncore should work ok, some of those you'll probably find in the list archives. I've also seen it claimed that the 8 channel Oncore needs to be configured in 6 channel compatibility mode in order to work in the Z3801A but other comments seem to suggest it can be used as a drop in replacement. Here for example in box at bottom right of page.... _http://www.ka7oei.com/oei_gps.html_ (http://www.ka7oei.com/oei_gps.html) I haven't got a Z3801A up and running at the moment but if nobody can give you a definite answer I'd be happy to run one up with an 8 channel Oncore fitted and let you know how it goes. Regards Nigel GM8PZR In a message dated 13/09/2012 17:40:26 GMT Daylight Time, [email protected] writes:
Hi, The GPS receiver in my Z3801 has died and I need to replace it. I know the one inside the Z3801 is a 6 channel Oncore. But these are hard to locate. Could anyone recomend a source of suitable replacement cards. be it 6 or 12 channel, the main thing is it works thanks Doug G4DZU _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
