On 9/17/2012 6:03 PM, time-nuts-requ...@febo.com wrote:
OK, you can test a VP Oncore GPS receiver alone if you have a mean to
translate the TTL serial port to a regular RS232 for the PC. This can be
done with a MAX232 chip (or equivalent). Then the pinout (refer to the
FYI, I've had really good luck with these over the years:
http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493
http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393
The big thing is the drivers are really well written. The seem to be
able to talk to anything I point them at. Never found any software
they don't like (yet) ...
I keep a few around, just in case.
Dan
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
