<snip> I would hence believe that a 50 Hz flicker must be pretty close to the edge of what can be perceived, so I'm having trouble believing that a flicker at more than twice that rate would be perceptible at all by anyone. <snip>
Oh, but it is. A couple of years ago I bought one of the Chinese 30 LED spot light bulbs for about $8 on ebay. I thought I'd give it a try for a workbench light. When I plugged it in at work (60 Hz power, here) the two guys standing behind me yelled "gaahhh" at the same time I did. The flicker was horrendous. The earlier comment about peripheral vision also applies, though. It's worse in the periphery than in direct view. The "power supply" is nothing more than a bridge rectifier, two current limiting resistors, and a filter capacitor. The capacitor obviously wasn't big enough, though, because it flcikered plenty. -John -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Dennis Ferguson Sent: Tuesday, September 18, 2012 1:52 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Hi Power LED Light power supply... On 18 Sep, 2012, at 12:42 , Chris Albertson wrote: > On Tue, Sep 18, 2012 at 5:21 AM, Bob Camp <li...@rtty.us> wrote: >> Hi >> >> I suspect those same 120Hz sensitive people would not be able to watch TV or >> a movie :).... > > In the old CRT type TV sets, the phosphor has some persistence. > Movies are modulated with a square waves, the frame blinks off and > goes dark then blinks on. But the LED's brightness is fast enough to > track the sine wave and would be bright only for an instant with quick > pulses of light. Just to add to this... Ontario, Canada originally ran its power grid at 25 Hz. When they switched the grid to 60 Hz in the 1930's some of the industrial power users, particularly in northern Ontario where private (usually hydroelectric) power generators were common, never got around to changing their plants over. Mine and paper mills using 25 Hz power were common as recently as the 1980's, and might still be there for all I know. Standard incandescent light bulbs don't have a lot of persistence when run on 25 Hz power (I assume there might have been a time when you could buy incandescent bulbs designed for 25 Hz, but not in my lifetime). They don't go entirely off, but they get significantly dimmer in the visible spectrum in the dips as the output red-shifts towards the infrared; they follow the sine pretty well. In my teens, when visiting a place using 25 Hz power for lighting, I could initially see an incredibly annoying flicker when I first got there but after a minute or two this would fade and I'd no longer notice it. Some other people would also see the flicker but others, including my parents, couldn't see it at all so there seemed to be variation (maybe age-related, maybe not) among individual abilities to see this. Dennis Ferguson _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.