Gentlemen, I have currently two OSA 8600 in my house for testing purposes. One of them says "VAR 02" on the label and has an explanation of the pinning of the D-Sub connector on it. I wired a cable with that pinning and made my the first measurements with this oscillator.
The second oscillator says "VAR 60" and is different from the first in that the enclosure is abt. 2" longer than the first one due too an additional piece of tubing that is connected with some screws to the original body which is the same size as the first oscillator. When I connect my cable to the second oscillator it draws no current from the power supply and no output signal is available. Does anyone of you have the pinning for the second type of OSA 8600 available? The serial # is 822, the supply voltage is 24V and there is additional information on the label saying A0320666 and QNM 58A which I am not aware for what it stands for. Thanks in advance for your help Ulrich Bangert www.ulrich-bangert.de Ortholzer Weg 1 27243 Gross Ippener _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
