Tom, many thanks! This is enough info. I will open the box and connect to the "original" plate. Had no idea that it is something like these Russian puppets.
Best regards Ulrich Bangert > -----Ursprungliche Nachricht----- > Von: [email protected] > [mailto:[email protected]] Im Auftrag von Tom Knox > Gesendet: Dienstag, 25. September 2012 21:45 > An: Time-Nuts > Betreff: Re: [time-nuts] Question on OSA8600 Oscillators > > > > Hi Ulrich; > > It was to adapt the BVA to a telecom system. I cannot > remember the exact pin out. You can easily check by removing > that extension. It houses a > POT and the DB9 to DB9 crossover wiring adapter. You can then see the > correct pinout since the internal DB9 connector on the main BVA is > conventionally wired. Email of call if I can be of more help. > > Best Wishes; > > Tom Knox > > Time and Frequency Division > NIST > 4475 Whitney Place > Boulder Colorado 80305 > > 1-303-554-0307 > > > From: [email protected] > > To: [email protected] > > Date: Tue, 25 Sep 2012 20:14:47 +0200 > > Subject: [time-nuts] Question on OSA8600 Oscillators > > > > Gentlemen, > > > > I have currently two OSA 8600 in my house for testing > purposes. One of > > them says "VAR 02" on the label and has an explanation of > the pinning > > of the D-Sub connector on it. I wired a cable with that pinning and > > made my the first measurements with this oscillator. > > > > The second oscillator says "VAR 60" and is different from > the first in > > that the enclosure is abt. 2" longer than the first one due too an > > additional piece of tubing that is connected with some > screws to the > > original body which is the same size as the first > oscillator. When I > > connect my cable to the second oscillator it draws no > current from the > > power supply and no output signal is available. Does anyone of you > > have the pinning for the second type of OSA 8600 available? > > > > The serial # is 822, the supply voltage is 24V and there is > additional > > information on the label saying > > > > A0320666 > > > > and > > > > QNM 58A > > > > which I am not aware for what it stands for. > > > > Thanks in advance for your help > > > > Ulrich Bangert > > www.ulrich-bangert.de > > Ortholzer Weg 1 > > 27243 Gross Ippener > > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
