There could well be interest on the GenRad Yahoo Group. -John
================= > I have an old, but looks just like new, General Radio FR46/URM-18 > Frequency > Calibrator. > > It is a rack mount and has a metal container that has inner box that is an > oven. In the center of the oven is a suspended quartz block, hung by > spring > like devices in all directions. The front panel has a thermometer that > reads the temp of the oven. There is also a meter on the front panel > marked > 0 - 200 Micro amps. > > > > There is an electronics deck in the rear with a couple of tubes, and a > adjustment pot. There are a pair of cables with large military type > connectors hanging from the back of the unit. One goes to the oven box, > the > other to the electronics deck. I expect that would be the connections for > the external power supply, that is not part of this panel. > > > > Does it have any value? Something that I should put on eBay? Or should > be > tossed in the dump. > > > > It is such beautiful workmanship, it seems a shame to just toss it out or > destroy it. > > > > Thought and ideas please, > > George > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
