Hello, while asking info about the FE5682, I realized that for another project (model plane data logging) I will buy some cheap gps modules built around an MT3339 chipset. In my mind somewhere I stored the fact that in the datasheet of these module is mentioned the pps output, so I checked and the manufacturer is claiming that it has "High accuracy 1-PPS timing support for Timing Applications (10ns jitter)"
This is the module I'm talking about: http://www.mirifica.it/store/gps/342-globaltop-fgpmmopa6h-pa6h.html http://www.alcom.be/binarydata.aspx?type=doc/GTop-FGPMMOPA6H-Datasheet-V0A.pdf Has anybody used this chipset or similar for GPSDO? I have no experience with discipled oscillators but if there is any hope that the pps out of these modules is good for the task maybe it's time for me to start reading more about the subject. The final goal will be to check the timing of the Rb I have around. Thanks, Fabio. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
