About:
{
Date: Thu, 22 Nov 2012 22:26:24 +0100
From: Fabio Eboli <[email protected]>
To: [email protected]
Subject: [time-nuts] MT3339 chipset in Globaltop's FGPMMOPA6H
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes";
format="flowed"
Hello, while asking info about the FE5682,
I realized that for another project
(model plane data logging) I will buy
some cheap gps modules built around an
MT3339 chipset.
In my mind somewhere I stored the fact
that in the datasheet of these module
is mentioned the pps output, so I checked
and the manufacturer is claiming that it
has "High accuracy 1-PPS timing support
for Timing Applications (10ns jitter)"
This is the module I'm talking about:
http://www.mirifica.it/store/gps/342-globaltop-fgpmmopa6h-pa6h.html
http://www.alcom.be/binarydata.aspx?type=doc/GTop-FGPMMOPA6H-Datasheet-V0A.pdf
Has anybody used this chipset or similar for GPSDO?
I have no experience with discipled oscillators
but if there is any hope that the pps out
of these modules is good for the task maybe
it's time for me to start reading more about
the subject.
The final goal will be to check the timing
of the Rb I have around.
Thanks,
Fabio.
}
Hello TNutters,
I did some test with this module from Adafruit
(http://www.adafruit.com/products/746) and it seems not a bad unit. Tested it
together
with my TBolt and the PPS seems quite stable most of the time, I did not do any
logging and math on the result,
just letting the TBolt trigger the scope and apart from the cable offset I
guess 80% of the time the module was
within 10 to 15 ns.
However the specs are not very clear and it is a typical chip for mobile use in
eg. carnav stuff. I also saw some
other specs where the jitter was specified as 100ns. and even one with a 1
microsec. so I'm a little confused.
As soon as I have some time I plan to connect this module to a BeagleBone and
do some testing for an NTP server
I think the Beagle is better for this than the RaspBerry because of the "real"
ethernet port.
Greetz,
Jacques Tiete
0499 99 83 78
[email protected]
Op 23-nov.-2012 om 00:19 heeft [email protected] het volgende
geschreven
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
