David Try here, they have the service guide but no component level info available that I can see..... _http://na.tm.agilent.com/8720/document.htm_ (http://na.tm.agilent.com/8720/document.htm) Regards Nigel GM8PZR In a message dated 26/11/2012 14:12:55 GMT Standard Time, [email protected] writes:
I've got an HP 8720D VNA. This has been out of support from Agilent for 8 years, so its getting on a bit. There's a clock in the instrument which keeps the date and time. This is losing about 1 day per month (rough guess), so it has slowed by a bit over 3%. I'm guessing this is likely to be a battery running flat, but are there any other likely causes? I know crystal can jump in frequency, but I'm guessing not by 3%, but perhaps if there was stress in the crystal, it might be. It does not help the fact I can't find a service manual for this instrument. It's also a fairly expensive bit of kit (I paid $16,000 a few months back), so I'm not keen to screw it up. If need be, I'll write a bit of code which sets the clock from my computer whenever the GPIB is used. I've no need for precision time keeping on this, but it would be nice to have a copy of the date and time on any printouts. That's not possible when the clock runs so slow. On the off chance anyone does have a service manual for an 8720D, please let me know. I'll buy a copy if need be. There is not one on the Agilent web site - only the user manual. Dave _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
