It sounds like a SW limit, not hardware. Silly question: Have you read the manual?
-John ============= > > 29/11/2012 09:30 > > The replacement for the missing U6 chip arrived this morning and it > now completes the 200 MHz self test It will read up to the limit of my > frequency generator on Band 3 which is only 1040 MHz, but looks > promising. > > Band 2 also works, but seemingly has an anomaly. I cannot get Band 2 > to read below 185.000 MHz. If I input 184.900 it won't read it and > displays zeros. 185 and up is OK... Weird. It should read from 10 MHz > up to 1 GHz. It'll go to 1 GHz plus AOK. > > Band 1 appears to work fine. > > These tests are with both my GPS referenced external standard and the > internal reference used. > > So Band 2 appears to have a further issue. Will refer to the manual > and see if I can fathom it out. Any ideas as to why Band 2 will only > read from 185 MHz upwards please? Thanks. > > > -- > Best Regards, > Chris Wilson. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
