Re: [time-nuts] EIP545A 18GHz counter query

[Chris Wilson]

<SNIP>______________________________________________________________

> This is where I am now, I hope the above makes some sense if
> viewed with the service manual and the schematics. Thanks.




07/12/2012 10:17

Latest update:

Removed Q12 from board A109 and put a 1k resistor across vacant
emitter and collector board holes, thus putting 12 volts into the
mixer to switch it externally. Counter now works perfectly on Band 2
and I followed the signal path from R2 / R3 junction (wrong impedance,
but a reference nonetheless) through to the anode of CR3.

Hopefully self explanatory with regard to file names, scope patterns
are at http://www.gatesgarth.com/scope/scope.zip

Pretty stuck as to where to go next now.



-- 
       Best Regards,
                   Chris Wilson.


_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.