So that makes them double oven then. Plus who says your basements cold. I hate to bring this up. But which Rigol did you use. I know this topic was beat to death 6 months ago. Regards Paul WB8TSL
On Thu, Dec 20, 2012 at 10:50 AM, David Martin < [email protected]> wrote: > >Any idea of what drove the larger drift between the Tbolts and the > >PRS10 at 1:26 through1:29? > > >Be interesting (to me at least) too see the same post survey. Neat idea. > > >Brent > > The stack of TBolts is located in the corner of an unheated basement > "shop". There is no direct heating vent to cause direct air flow to the > PRS-10s and the TBolts. The three TBolts are sitting one on top of the > other making a nice warm stack with the one in the middle somewhat > temperature isolated from the room by the heat from the ones on top and > below it..... > > The excursion event seems to coincide with the afternoon "return from work" > furnace activity. The house uses a set back thermostat that keeps the > empty house at a lower temperature during the day. It then preheats the > house to a more normal temperature before I come home from work. This > event is a fairly long continuous run of the furnace. > > The TBolt room contains the duct work to the rest of the house but no > direct air outlets. > > I'm surprised that the warm TBolt stack responds so dramatically to a > little "draft" heat from the furnace duct nearby and the vent a room away. > > The Timing Mode capture is in process. It will be fun for me to see the > difference in Timing Mode vs Navigation Mode... > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
