Lester Veenstra wrote:
The typical test supply on a bench for clean VCO testing is a small gel cell
battery.  For a regulated power supply, make one using a 723. The 723 has
far lower noise out than the monolithic regulators.

Depends on the variety of 723 some are noisier than others.
Some use an internal zener reference, some use a bandgap reference.
The original used a zener reference.

Bruce
Lester B Veenstra  MØYCM K1YCM W8YCM
[email protected]

US Postal Address:
5 Shrine Club Drive
HC84 Box 89C
Keyser WV 26726
GPS: 39.33675 N  78.9823527 W

Telephones:
Home:                     +1-304-289-6057
US cell                    +1-304-790-9192
UK cell                    +44-(0)7849-248-749
Guam Cell:              +1-671-929-8141
Jamaica:                 +1-876-456-8898
This e-mail and any documents attached hereto contain confidential or
privileged information. The information is intended to be for use only by
the individual or entity to whom they are addressed. If you are not the
intended recipient or the person responsible for delivering the e-mail to
the intended recipient, be aware that any disclosure, copying, distribution
or use of the contents of this e-mail or any documents attached hereto is
prohibited.



-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Richard (Rick) Karlquist
Sent: Wednesday, January 30, 2013 9:17 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] Low noise power supplies?


I know this topic has been discussed in the past on the list, but a
colleague is asking if there are any off the shelf low noise power supplies
for testing oscillators.  Something a cut above an HP "brick" lab power
supply etc.  They are hoping to avoid having to homebrew a power
conditioning circuit.
Did we ever arrive at a concensus as to the state of the art in homebrew
power conditioning circuits?

Any help would be appreciated.

Rick Karlquist N6RK
_______________________________________________
time-nuts mailing list -- [email protected] To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to