The delay is mainly do to the fact that the promise to do the drawings did not materialize. The counters are done and tests on variations of the D/M's are ongoing since the noise floor is not the counter but the D/M. Bill Riley's boards are out there and it would be nice to get some feedback on test results, also I have explored the possibility of some one manufacturing the board. A time nut is in the business and will be able to supply the SMD version of the board for $160 plus shipping if a minimum volume of 20 get ordered. As to D/M four options will be available starting with Bill's PCB. I have 4 kits of my D/M and counters available and will work with some that have the proper OCXO's and willingness to test with Time Lab since tests with Stable 32 and Ulrich's A/V software is ongoing. If interested please contact me off list Recent tests by Corby has convinced me that with the four channel counter not only cross correlation but also three corner hat is doable with one dual mixer. The offset oscillator has to be also of high quality. Some of the delays are due to visitors over the holidays but also the fact that the D/M project is not the only one. Of equal or more importance is a home standard that can get close to a Maser using GPS Rb and the best OCXO in the house.On the D/M the only work for us is packaging and display PIC programming. Latest set of boards were ordered yesterday. The display is a nice feature but not necessary. I hope we will have the drawings in about 10 days. Bert Kehren In a message dated 2/6/2013 4:15:33 A.M. Eastern Standard Time, [email protected] writes:
Dear all, ! Did I miss something, or are we "all" waiting for more info to be published on this system? I checked KO4BB site, but I couldn't find any new info on this project. An update would be appreciated! Note: This message is written with a positive intent, not as a complaint! Thank you, best regards, Jeroen _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
