Recommend doing a reset to default and configure as directed there are a lot of configurable options which can control access to this box
Sent from my iPhone On Feb 22, 2013, at 7:22 AM, Martin A Flynn <[email protected]> wrote: > On 2/21/2013 10:16 PM, Mike S wrote: >> On 2/21/2013 10:05 PM, Martin A Flynn wrote: >>> Hi folks, >>> I picked up a used TS-2100L for use at a local technology museum. Unit >>> powers up, locks, and syncs. (all three front panel LED are green) >>> >>> Using wire shark I can see traffic to the device on 192.168.56.99, >>> however I can't connect to the management page. >>> >>> Any suggestions on how to proceed? >> >> Obvious questions - Can you ping it? Did you configure your PC to be on the >> same subnet (192.168.56.0/24)? Have you tried connecting to the serial >> console? > PC on same subnet. Tried factory-assembled straight and crossover serial > cables, it will not connect to serial port "B". I won't rule out the > cables being pinned wrong. > > Martin > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
